1～10 件を表示 ／ 全 10 件
This is an adapter that can be mounted on panels or walls to relay video and audio signals. It is a product where the mounting nut and relay connector are integrally molded.
This is a relay connector with an integrated panel mount section that can be attached using M3 screws and is designed for use with standard cables. For more details, please refer to the related links.
This is a dustproof and waterproof relay adapter compatible with IP66 and IP67.
This is a panel mount type dustproof and waterproof relay adapter that complies with IP66 and IP67 standards. IP66: Completely dust-tight structure (a structure that completely protects against the ingress of dust), and is not adversely affected by direct water jets from any direction (12.5 liters per minute at a distance of 3 meters and 30 kPa for 3 minutes). IP67: Completely dust-tight structure (a structure that completely protects against the ingress of dust), and does not allow water ingress even when submerged in water at a specified pressure and time (15 cm to 1 m underwater for 30 minutes). For more details, please refer to the related links.
This is a set product that allows the connection chip to be mounted on the panel.
This is a set product that enables the panel mounting of video and communication outlet chips using Panasonic-made device embedded plates and small mounting frames (M3 tapped type). For more details, please see the related link.
Snap-in connectors, sets that combine cables with DLX-type adapters to form Neutrik-type shapes, and connectors from Neutrik.
It is a panel mount type that fits the Neutrik DLX series with a DLX type adapter installed, as well as a panel mount made by Neutrik. For more details, please see the related links.
Relay adapters such as HDMI and USB that can be directly mounted on the panel.
Relay adapters such as HDMI and USB that can be directly mounted on the panel. We offer a variety of relay adapters compatible with HDMI, USB 2.0, and USB 3.0.
A product with a snap-in relay connector set in a panel mount shape.
This is a set product that allows for panel mounting by attaching a snap-in relay connector to the bezel. For more details, please refer to the related links.
This is a panel mount type connector for coaxial connectors.
This is a product range of panel-mounted coaxial connector relay adapters. For details, please see the related links.
This is a D-sub type relay connector that can be mounted on panel boards with a thickness of 1.2mm or less.
This is a D-sub type relay connector that can be mounted on panel boards with a thickness of 1.2mm or less. For more details, please see the related link.
LAN (CAT6) panel mount relay adapter [Dustproof and waterproof, IP67 compliant] shielded (STP) type cylindrical with end cap included.
● This is a relay adapter with a panel mountable RJ-45 female connector (both the front and back sides have female connectors). ● It is a relay connector with a dustproof and waterproof structure compliant with IP67. ● The recommended maximum thickness of the panel to be mounted is 4mm, and the recommended minimum mounting pitch is 40mm (please note that this dimension does not take into account the size of the tools used for tightening large nuts). For more details, please refer to the related links.
![Panel mount relay adapter HDMI-A female [HDMI 2.0 compatible]](https://image.mono.ipros.com/public/product/image/e81/2001484994/IPROS2604080476391132535.jpg?w=280&h=280)
Panel mount relay adapter, both sides HDMI-A female, [HDMI 2.0 compatible] (successor to PADP-HFHF)
● This is an adapter that connects HDMI cables by being mounted on panels or walls, featuring HDMI-A female connectors on both sides. ● It complies with the HDMI Ver 2.0 standard (High Speed HDMI Cable with Ethernet) and supports 4K×2K at 60p. ● It is very convenient for relaying connections using HDMI cables between devices and equipment. For more details, please see the related links.
